Monday, May 23, 2005

Fun With Structural Members - Part I


If you have worked with Structural Members within ADT in past releases for any length of time, like me you have probably wished for the ability to mass fill out the nodes within a column grid. Unfortunately this has only been possible during the creation of the column grid, otherwise you had to place these one-by-one or create and copy to multiple node locations.

Well things have changed for the better in ADT 2006. If you already have a column grid placed you can mass fill out nodes without columns by simply using the ctrl key during placement of the column.

The use of the ctrl key during placement presents us with three options:
  1. Add a column to a node
  2. Add columns to all nodes
  3. Add column at a point

There is a red visual indicator shown on the screen, depending on the option cycled to above, indicating the insertion point(s) you are getting ready to use. Video is often a better medium to show examples, so you may wish to watch the following video example.

The techsmith codec is required to view the file and is available from the techsmith website.

0 comments:

 

Copyright 2009 All Rights Reserved Beau Turner Triple D Design, LLC | Template design by Brian Gardner | Converted to Blogger Template by Bloganol dot com